What size wastegate and .AR hotside would be best for me?
#1
What size wastegate and .AR hotside would be best for me?
So temporarily going to run a 60 mil turbonetics 60-1 to4s turbo. Though it only had the compressor side and missing the hotside. What size .ar should i go with if i want boost as early as 3500 rpm maybe that holds good to redline? Or are my boost standards to high and should i better get a size that comes online at about 4-4.5k rpm that will hold well to the top end?
Stock port 47k mile motor, haltech p1000, 2000 cc secondary, RP competition fuel pump, and a pettit cool charge 3.
And for the wastegate, my power levels are aiming for about 375 rwhp even 350 is fine with me. Hopefully on about 14-18 psi?
Stock port 47k mile motor, haltech p1000, 2000 cc secondary, RP competition fuel pump, and a pettit cool charge 3.
And for the wastegate, my power levels are aiming for about 375 rwhp even 350 is fine with me. Hopefully on about 14-18 psi?
Thread
Thread Starter
Forum
Replies
Last Post
David_raz89
3rd Generation Specific (1993-2002)
9
01-31-17 01:05 PM