what fuel setup should i run?
#1
Senior Member
Thread Starter
Join Date: Feb 2006
Location: burbank ca
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
what fuel setup should i run?
I have a HKS t51r kai full turbo kit and i want to run 15psi to 18psi. I was thinking of getting the rx7store fuel kit but i don't want to replace the primary fuel rail and there kit comes with it. Do i need to replace the primary injectors or can i keep them stock? I just wanna know what is the best setup would be without spending a lot of money.
thanks
thanks
Last edited by matt g; 11-28-07 at 02:33 AM. Reason: typo
#2
Most people including myself use the stock 850 sec injectors in the primary spot with a little modification, while you have them out you should also get them cleaned and flowtested.
#3
Senior Member
Thread Starter
Join Date: Feb 2006
Location: burbank ca
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
I have about 5000 miles sence they where cleaned and flowtested by rc. What modification do i have to do for them to work? What brand 1600 injectors are you running also are you running the stock rail?
thanks for the help.
thanks for the help.
#4
The one
iTrader: (5)
Matt
The extreme kit we sell only comes with the secondary rail. Its the ultimate system that comes with the primary.
Link here:
http://www.rx7store.net/product_p/extremefuelfd.htm
Like pwwatkins said, just move the 850's to the primary spot. You will need to mill down the primary rail for that.
Jason
The extreme kit we sell only comes with the secondary rail. Its the ultimate system that comes with the primary.
Link here:
http://www.rx7store.net/product_p/extremefuelfd.htm
Like pwwatkins said, just move the 850's to the primary spot. You will need to mill down the primary rail for that.
Jason
#5
Senior Member
Thread Starter
Join Date: Feb 2006
Location: burbank ca
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Hi jason do you have a stock primary rail that is milled in stock? and ill send mine to you for a core.
thanks
thanks
Matt
The extreme kit we sell only comes with the secondary rail. Its the ultimate system that comes with the primary.
Link here:
http://www.rx7store.net/product_p/extremefuelfd.htm
Like pwwatkins said, just move the 850's to the primary spot. You will need to mill down the primary rail for that.
Jason
The extreme kit we sell only comes with the secondary rail. Its the ultimate system that comes with the primary.
Link here:
http://www.rx7store.net/product_p/extremefuelfd.htm
Like pwwatkins said, just move the 850's to the primary spot. You will need to mill down the primary rail for that.
Jason
Thread
Thread Starter
Forum
Replies
Last Post