I had the apexi rx6b and the power fc in my car but I have sold them and I and going with a t04r and Im up in the air as to what ecu to go with. from what ive understood you cant run high boost on the power fc properly which is why i sold it. So Im wondering what you track guys that run 20 and up psi are using. What the installation was like etc. I know there is the ecu forum on here but I wanted to write this hear since it related to the single turbo and high boost. Any help would be appreciated

 

you cant go wrong with a Microtech LT8

 

A PFC can handle higher boost just fine. You just need to purchase a GM 3-bar map sensor and change the PIM settings using the datalogit or Commander.

 

what boost can the pfc handle? from what ive heard it isnt possible to run the higher boost on it. I have the gm 3 bar map sensor already, I never hooked it up. I want to run 20psi or possibly 22psi for the track, the pfc can handle that?

 

The PFC can run a 3-bar sensor = at least 28 psi.

 

Haltech E6K, termed harness.
3bar map,

 

Yes the PFC can handle that. With Datalogit you can change the scale of the boost cells to go up as high as you need.
You can use a few less cells for vacuum and make your increments in boost slightly larger to run more boost then you will ever need.