weldon fuel pressure regulator
11-23-05, 09:33 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: trinidad, West indies
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
weldon fuel pressure regulator
Ok heres the problem ,,i am getting no fuel in my return line and the regulator is brand new ,its hooked up properly,the regulator is the last thing the fuel sees before it is sent back to my fuel cell,i have my regulator set at 38., tried different settings but still no fuel returning to my fuel cell.What do you think i can check
11-23-05, 11:09 PM
#2
Rotary Enthusiast
iTrader: (3)
Join Date: Apr 2001
Location: las vegas, NV
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Is it the 2040? Are you sure the pump is pumping? I know it sounds like a dumb question but like you already know if there is no fuel pressure then there is no fuel......to a certain extent i guess.
Do you have the guage in the right port? Does the guage work? Are you getting anything at all? Is the cell vented? I'm not an expert but i've done my fair share of fuel systems and i just got done changing my whole system over to Weldon. I've got the 2040 regulator on mine and everything is fine.
Do you have the guage in the right port? Does the guage work? Are you getting anything at all? Is the cell vented? I'm not an expert but i've done my fair share of fuel systems and i just got done changing my whole system over to Weldon. I've got the 2040 regulator on mine and everything is fine.
Last edited by silvr94r2; 11-23-05 at 11:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
