So I am working on my fuel system and am wondering which are the correct 1600s to use on Keiths primary rails. I PMed him but I am sure he is just busy

Does it matter which ones I get, or are they pretty much all the same?

I have a part number for a ford injector xl3e-c5a for a 2000 Crown Victoria natural gas model.
Is this correct? Because I checked on these and I can get these for $77 at the local Ford dealer.

Or are they part number f5te-b5a (280 150-839).
Because I could not find these at the Ford dealer.

Someone left this link for some 1600s are these the correct ones? $75
http://www.injector.com/fuelinjectors.php

Where is the best place to get a good price on the correct 1600s?


Do we need to use different Orings for the bottom of the injector than what is supplied with the 1600s on the primary/secondary?

I can get two 10ohm, 10 watt resistors at Radio Shack for $1.99
Is there a particular one that needs to be used, Part number?

What about the plugs for the injectors where is the best place to find them?
Can we get them at the dealership? I forgot to ask if they carry them.

Thanks guys

 

Just get them from Keith, he is a good man and wont rip you off.

Dan

 

The resistors at radio shack won't handle enough wattage. You need at least 25 watts and between 6-8 ohms.