Hi Guys, I was wondering if you could look at the following specs of a turbo that im thinking of buying and tell me what you think im looking for 600rwp at 28+psi

Compressor wheel outer diameter is 100mm
Compressor inducer is 75mm

Turbo outer wheels is 95.7mm
Turbo exducer is 88.1mm
And the a/r is 1.10

 

BW turbo? S400 series?


-S-

 

Hi sean its the Tech 400 but it has a 1.10ar not the 1.32.

what do you think.

 

Those seem to be BW specs, my guess is you'll get the power your after, they are proven to It is very similar in size to a 4202 with but has minor differences larger inducer smaller exducer on the comp. Yet a much larger turbine. It will feel laggy just a heads up but if drag is your purpose 400's a proven performers.

-S-

 

Thanks for the help Sean I appreciate it. Its gone be either HT 400 or the gt 4202 but probably the 42 as i dont think i can fit the 6' dawn pipe that the 400 uses on a right hand drive car.

Thanks
Erdin

 

No problem, let me know is you need anything. We actually machine down the 42R turbine housings to fit 4" and provide the proper clamp and flange to suit.