Turbo A/r Info Difference
#1
Full Member
Thread Starter
Join Date: Dec 2008
Location: AUSTRALIA
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Turbo A/r Info Difference
Hey guys i done a seach but nothing i wanted to know was in there.
I want to know if you run a turbo say t04 with a rear housing with a .96 a/r and then u run a bigger turbo say a t88 with a .96 a/r rear housing will they both spool at the same time or not as the a/r is the same but one turbo is twice the size?
cheers guys
I want to know if you run a turbo say t04 with a rear housing with a .96 a/r and then u run a bigger turbo say a t88 with a .96 a/r rear housing will they both spool at the same time or not as the a/r is the same but one turbo is twice the size?
cheers guys
#3
wannaspeed.com
iTrader: (23)
The a/r is only one factor that effects spool. The amount of blades, the size, and pitch of the blades/wheels will all effect spool, and air flow. Both from the exhaust side and compressor side. A larger wheel will be heavier and therefore take more effort to spin. (spool)
This of course does not factor in a comparison between ball bearing and journal bearing turbos in which case a larger BB turbo can out spool a smaller JB turbo due to less friction/drag.
This of course does not factor in a comparison between ball bearing and journal bearing turbos in which case a larger BB turbo can out spool a smaller JB turbo due to less friction/drag.
Thread
Thread Starter
Forum
Replies
Last Post