Tso4 or T-70
#1
Junior Member
Thread Starter
Join Date: Aug 2004
Location: New Jersey
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Tso4 or T-70
I recently purchased a T-70 ceramic ball bearing turbo with .69 in the turbine housing and i also have a ts04 thrust beeaing turbo .89... by the way this is a single turbo setup...
im wandering if i want good amount of power and i want to be able to fool around on open roads and street lights but also want to run a good time at the strip. the tso4 fits perfectly in my car but the t-70 needs a tang housing to fit because it hit s the firewall with the oncenter setup both turbos need a rebuild... wanted to know what you guys think i should do...
im wandering if i want good amount of power and i want to be able to fool around on open roads and street lights but also want to run a good time at the strip. the tso4 fits perfectly in my car but the t-70 needs a tang housing to fit because it hit s the firewall with the oncenter setup both turbos need a rebuild... wanted to know what you guys think i should do...
#2
Weird Cat Man
Of those two, I think the TS04 would be the better pick and here's why I think that:
1 - .69 housing vs .89 housing... .69 is awfully small for a rotary.
2 - t70 vs ts04... ts04 is more streetable in my opinion... t70 has more potential for top end, but you will never see the benefit of that if you have a small .69 housing.
1 - .69 housing vs .89 housing... .69 is awfully small for a rotary.
2 - t70 vs ts04... ts04 is more streetable in my opinion... t70 has more potential for top end, but you will never see the benefit of that if you have a small .69 housing.
Thread
Thread Starter
Forum
Replies
Last Post