Tial Vacuum nipples and bolt
#1
Darkside FD
Thread Starter
Join Date: Jan 2004
Location: AZ
Posts: 1,175
Likes: 0
Received 0 Likes
on
0 Posts
Tial Vacuum nipples and bolt
Hey all,
I was wondering if anyone knew where I could find the vacuum nozzles that screw into the Tial wastegates and blow off valves. I had the top of the wastegate vented to the atmosphere and the nozzle and bolt must have vibrated loose and came off.
I need it to run my boost controller...
I was wondering if anyone knew where I could find the vacuum nozzles that screw into the Tial wastegates and blow off valves. I had the top of the wastegate vented to the atmosphere and the nozzle and bolt must have vibrated loose and came off.
I need it to run my boost controller...
#2
tial or one of their dealers is really the only place to get the air fittings, that is, if you want an original piece.
if you dont really care that it looks like an original tial part then you can just find out the thread pitch (M10x1.0 i believe) and get a banjo bolt and a fitting
if you dont really care that it looks like an original tial part then you can just find out the thread pitch (M10x1.0 i believe) and get a banjo bolt and a fitting
#6
twinturboteddy ws my idol
Join Date: Feb 2003
Location: Elkton, MD
Posts: 2,347
Likes: 0
Received 0 Likes
on
0 Posts
cozmo or anyone else:
Is this the fitting that goes on the top of the wastegate (I have a Tial 38mm)???? I need this fitting ASAP!! Scrub was trying to install my Profec Type S, and we found YET AGAIN another **** up by the infamous Ray Wilson owned PFS of MD. Speaking with a respectable tuner shop in our area who works on many cars, they said this fitting is like "gold" to find and most of the time kept by the shop! I need this fitting for install of the Profec and the car gets tuned next saturday morning.
The fitting needed is the one on the top
Is this the fitting that goes on the top of the wastegate (I have a Tial 38mm)???? I need this fitting ASAP!! Scrub was trying to install my Profec Type S, and we found YET AGAIN another **** up by the infamous Ray Wilson owned PFS of MD. Speaking with a respectable tuner shop in our area who works on many cars, they said this fitting is like "gold" to find and most of the time kept by the shop! I need this fitting for install of the Profec and the car gets tuned next saturday morning.
The fitting needed is the one on the top
Last edited by AMRAAM4; 08-19-06 at 11:54 AM.
Trending Topics
#8
Darkside FD
Thread Starter
Join Date: Jan 2004
Location: AZ
Posts: 1,175
Likes: 0
Received 0 Likes
on
0 Posts
Yes that is the fitting on the top port of the wastegate. As said before, go to ATP turbo. They have the fittings. I actually will be purchasing mine from Elliot (1revvin7) locally.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM