The T51R has just arrived...:D
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Denmark
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
The T51R has just arrived...:D
Hi...
I have just got the HKS T51R full kit to my FD... I took some pics so I could see the difference of the T51R kai and the T04R..
The polished turbo is a T04R...
It looks like the T51R can eat the T04R for breakfast..
http://www.japspec.dk/100_0167.jpg
http://www.japspec.dk/100_0173.jpg
http://www.japspec.dk/100_0176.jpg
http://www.japspec.dk/100_0170.jpg
http://www.japspec.dk/100_0172.jpg
I made 406 hp with the T04R, so i will get you updated when the T51 kit is installed...
I have just got the HKS T51R full kit to my FD... I took some pics so I could see the difference of the T51R kai and the T04R..
The polished turbo is a T04R...
It looks like the T51R can eat the T04R for breakfast..
http://www.japspec.dk/100_0167.jpg
http://www.japspec.dk/100_0173.jpg
http://www.japspec.dk/100_0176.jpg
http://www.japspec.dk/100_0170.jpg
http://www.japspec.dk/100_0172.jpg
I made 406 hp with the T04R, so i will get you updated when the T51 kit is installed...
#4
FD Under Construction =P
iTrader: (5)
Post your numbers, I'll have mine this weekend. Looking for close to 530hp at 23 psi... if I do race fuel.. i'm looking at close to 600hp. I am running 23 on pump + methanol. I'll take pics of my setup today, it looks insane.
Also what did you pay for it USD?
I paid $1700 for mine complete with wastegate, manifold, downpipe, crossoverpipe, turbo, etc.
I paid $450 for a new hotside wheel and rebuild.
$115 for a new flange to mate to my 4" exhaust.
So I'm about $2200 into it for a full complete kit. My turbo is polished also.
Just curious.
Also what did you pay for it USD?
I paid $1700 for mine complete with wastegate, manifold, downpipe, crossoverpipe, turbo, etc.
I paid $450 for a new hotside wheel and rebuild.
$115 for a new flange to mate to my 4" exhaust.
So I'm about $2200 into it for a full complete kit. My turbo is polished also.
Just curious.
#5
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by dhahlen
Post your numbers, I'll have mine this weekend. Looking for close to 530hp at 23 psi... if I do race fuel.. i'm looking at close to 600hp. I am running 23 on pump + methanol. I'll take pics of my setup today, it looks insane.
Also what did you pay for it USD?
I paid $1700 for mine complete with wastegate, manifold, downpipe, crossoverpipe, turbo, etc.
I paid $450 for a new hotside wheel and rebuild.
$115 for a new flange to mate to my 4" exhaust.
So I'm about $2200 into it for a full complete kit. My turbo is polished also.
Just curious.
Also what did you pay for it USD?
I paid $1700 for mine complete with wastegate, manifold, downpipe, crossoverpipe, turbo, etc.
I paid $450 for a new hotside wheel and rebuild.
$115 for a new flange to mate to my 4" exhaust.
So I'm about $2200 into it for a full complete kit. My turbo is polished also.
Just curious.
Seven93, you will want to go to a 3.5 inch exhaust for the power levels you're looking for.
Trending Topics
#9
FD Under Construction =P
iTrader: (5)
$3500 used is the going rate, and turbos usually need a rebuild. $5500 new for the whole kit.
I just got extremely lucky.
But if I had to buy it retail, i would have gone with a GT42r or a GT45r. They less and produce more power and better life.
Regardless, the KAI is a sweet setup.
I just got extremely lucky.
But if I had to buy it retail, i would have gone with a GT42r or a GT45r. They less and produce more power and better life.
Regardless, the KAI is a sweet setup.
Thread
Thread Starter
Forum
Replies
Last Post
TheOneChen
Single Turbo RX-7's
6
10-15-06 03:19 AM