t2 intake manifold efficiency?
01-13-08, 06:13 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: seattle wa
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
t2 intake manifold efficiency?
my goal is to be able to rev out to 9grand. where are the flow limits with the s4 t2 intake manifold?
i will be running a half bridge and big turbo
thanks
i will be running a half bridge and big turbo
thanks
01-13-08, 11:44 PM
#2
Just turn up the boost!
iTrader: (1)
Join Date: Jul 2007
Location: HELL
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
i'm running stock intakes and revving to 9200rpms.... semi-bridge with a 74mm turbo. only running 10psi at the moment due to some intercooler issues and not having my water injection setup yet 
i've done some drivability tuning on our new dyno so far and the one pull i did wot i only took to 8500rpms and the power band was still going up at a steep incline. peak torque is at 6000 rpms... i'd say it will still be making hp at 9k, BUT again this is at stupid low boost. this turbo won't be efficient until 18psi or so hahaha
i've done some drivability tuning on our new dyno so far and the one pull i did wot i only took to 8500rpms and the power band was still going up at a steep incline. peak torque is at 6000 rpms... i'd say it will still be making hp at 9k, BUT again this is at stupid low boost. this turbo won't be efficient until 18psi or so hahaha
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM