T-66 Sizing for S5 t2
12-21-04, 03:29 PM
#1
T-66 Sizing for S5 t2
Looking to run a HKS manifold with a precision turbo T-66 What specs should I opt for for a streetported Series 5 Rx7.
Here are the options.
http://www.precisionturbo.net/turboc...tegory_id=3027
Looking at the PT-66 turbos.
I'm currently thinking Tangental with the HKS manifold with a .96 AR.
Also, reading the oil feed thread and the potential for serious bearing failure, what size oil feed should be used in this setup? I'll be using a -10an drain with t04 flanges, Should I also try hooking up Vacuum to the oil pan via the oil filler neck?
Here are the options.
http://www.precisionturbo.net/turboc...tegory_id=3027
Looking at the PT-66 turbos.
I'm currently thinking Tangental with the HKS manifold with a .96 AR.
Also, reading the oil feed thread and the potential for serious bearing failure, what size oil feed should be used in this setup? I'll be using a -10an drain with t04 flanges, Should I also try hooking up Vacuum to the oil pan via the oil filler neck?
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
