Suggestions For MORE POWER
#1
207
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Miami
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Suggestions For MORE POWER
I have to turn to everyone for help. I have slowly built up my FD to where I'm happy with the tune and everyday running. However, I think the car has even more and I don't know where to start to unleash it. I have run the car on C16 up to 24psi and it runs strong., I would guess over 400hp...but I want more. Here are the places I think are holding power back and I want your suggestions on what to change first:
1. Ignition: I have had in the car for years a Jacobs Rotary Master, NGK 10's, Taylor Wires and Stock coils. I hear all the stories about Jacobs but never once has it missed at high boost. Is this too old and should I change to HKS or MSD, and how much difference will the 2gen coils make.
2. Exhaust: 3-inch straight pipe all the way, no cat. I think I need 4-inch because the exhaust would keep a cheap ebay wastegate open at idle. I had to switch to a Tial 46mmm with a heavy spring to keep in closed.
3. Exhaust Manifold: HKS cast iron log style...I want reliability, but at what price did I pay in power.
4. Motor..thinking of pulling it and porting and refreshing. Compression in the 90's in both, so not dead but not fresh.
My tune is good, AFR's good, EGT's good, single T66, PFC, 880/1600, dual walpro, etc...
Your suggestion welcomed..
1. Ignition: I have had in the car for years a Jacobs Rotary Master, NGK 10's, Taylor Wires and Stock coils. I hear all the stories about Jacobs but never once has it missed at high boost. Is this too old and should I change to HKS or MSD, and how much difference will the 2gen coils make.
2. Exhaust: 3-inch straight pipe all the way, no cat. I think I need 4-inch because the exhaust would keep a cheap ebay wastegate open at idle. I had to switch to a Tial 46mmm with a heavy spring to keep in closed.
3. Exhaust Manifold: HKS cast iron log style...I want reliability, but at what price did I pay in power.
4. Motor..thinking of pulling it and porting and refreshing. Compression in the 90's in both, so not dead but not fresh.
My tune is good, AFR's good, EGT's good, single T66, PFC, 880/1600, dual walpro, etc...
Your suggestion welcomed..
#2
207
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Miami
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Suggestions for MORE POWER
--------------------------------------------------------------------------------
I have to turn to everyone for help. I have slowly built up my FD to where I'm happy with the tune and everyday running. However, I think the car has even more and I don't know where to start to unleash it. I have run the car on C16 up to 24psi and it runs strong., I would guess over 400hp...but I want more. Here are the places I think are holding power back and I want your suggestions on what to change first:
1. Ignition: I have had in the car for years a Jacobs Rotary Master, NGK 10's, Taylor Wires and Stock coils. I hear all the stories about Jacobs but never once has it missed at high boost. Is this too old and should I change to HKS or MSD, and how much difference will the 2gen coils make.
2. Exhaust: 3-inch straight pipe all the way, no cat. I think I need 4-inch because the exhaust would keep a cheap ebay wastegate open at idle. I had to switch to a Tial 46mmm with a heavy spring to keep in closed.
3. Exhaust Manifold: HKS cast iron log style...I want reliability, but at what price did I pay in power.
4. Motor..thinking of pulling it and porting and refreshing. Compression in the 90's in both, so not dead but not fresh.
My tune is good, AFR's good, EGT's good, single T66, PFC, 880/1600, dual walpro, etc...
Your suggestion welcomed..
I have to turn to everyone for help. I have slowly built up my FD to where I'm happy with the tune and everyday running. However, I think the car has even more and I don't know where to start to unleash it. I have run the car on C16 up to 24psi and it runs strong., I would guess over 400hp...but I want more. Here are the places I think are holding power back and I want your suggestions on what to change first:
1. Ignition: I have had in the car for years a Jacobs Rotary Master, NGK 10's, Taylor Wires and Stock coils. I hear all the stories about Jacobs but never once has it missed at high boost. Is this too old and should I change to HKS or MSD, and how much difference will the 2gen coils make.
2. Exhaust: 3-inch straight pipe all the way, no cat. I think I need 4-inch because the exhaust would keep a cheap ebay wastegate open at idle. I had to switch to a Tial 46mmm with a heavy spring to keep in closed.
3. Exhaust Manifold: HKS cast iron log style...I want reliability, but at what price did I pay in power.
4. Motor..thinking of pulling it and porting and refreshing. Compression in the 90's in both, so not dead but not fresh.
My tune is good, AFR's good, EGT's good, single T66, PFC, 880/1600, dual walpro, etc...
Your suggestion welcomed..
#4
Torqueless Wonder
iTrader: (1)
You should do a retune from a reputable and competent rotary tuner.
Its always best to do a tune up and re-dyno the car on your street tune and see what your numbers are....
Im not familiar with a T66 but if you are guessing in the 400's with C16 and 24psi... it seems a bit low as even a small GT35R can get over 450, and most who run aggressive tunes on stock twins are making clost to 380-400 on non-sequential
Its always best to do a tune up and re-dyno the car on your street tune and see what your numbers are....
Im not familiar with a T66 but if you are guessing in the 400's with C16 and 24psi... it seems a bit low as even a small GT35R can get over 450, and most who run aggressive tunes on stock twins are making clost to 380-400 on non-sequential
#5
207
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Miami
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
You should do a retune from a reputable and competent rotary tuner.
Its always best to do a tune up and re-dyno the car on your street tune and see what your numbers are....
Im not familiar with a T66 but if you are guessing in the 400's with C16 and 24psi... it seems a bit low as even a small GT35R can get over 450, and most who run aggressive tunes on stock twins are making clost to 380-400 on non-sequential
Its always best to do a tune up and re-dyno the car on your street tune and see what your numbers are....
Im not familiar with a T66 but if you are guessing in the 400's with C16 and 24psi... it seems a bit low as even a small GT35R can get over 450, and most who run aggressive tunes on stock twins are making clost to 380-400 on non-sequential
Trending Topics
#8
Rotary Enthusiast
Join Date: Jul 2006
Location: RAINELLE WV
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
1+ on a port.. Depending on what you want your car for street or track. I think if you going to use it for street a good full street port would be best with the T88 and cooling mist. You should see 450+ HP. I might be wrong
#9
RAWR
iTrader: (3)
You said on the strip. What are your ET's? Trap speed? Depending on these, someone can give you a rough estimate of what whp you're making. Also, can we have exact (as close as possible) compression numbers? "in the 90's" is very arbitrary. It could be 98/99 on both rotors, or 90/91 on both rotors. Either way, we need more accurate information.
My suggestion: Get a competent rotary tuner to come to whatever island you're on and get a good street tune. You won't have an exact hp number, but you'll know that you have a solid tune.
My suggestion: Get a competent rotary tuner to come to whatever island you're on and get a good street tune. You won't have an exact hp number, but you'll know that you have a solid tune.
#14
207
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Miami
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
You said on the strip. What are your ET's? Trap speed? Depending on these, someone can give you a rough estimate of what whp you're making. Also, can we have exact (as close as possible) compression numbers? "in the 90's" is very arbitrary. It could be 98/99 on both rotors, or 90/91 on both rotors. Either way, we need more accurate information.
My suggestion: Get a competent rotary tuner to come to whatever island you're on and get a good street tune. You won't have an exact hp number, but you'll know that you have a solid tune.
My suggestion: Get a competent rotary tuner to come to whatever island you're on and get a good street tune. You won't have an exact hp number, but you'll know that you have a solid tune.
#24
207
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Miami
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Okay..it has been a few weeks and I upgraded the following:
1. 4 inch exhaust with Borla muffler, no cat...really nice work, will post pics later
2. Upgrade turbo to PT-76 a/r 0.96 from Turbonetics T72, a/r 0.96
3. NGK R6725-115 spark plugs all around--(damn thats expensive)
The car needed retuning in the boost over 8psi as it was running lean. I was surprised how much more fuel was needed to get the AFR to 11.5 at 18psi.
Anyway went to the track and after 4 hard attempts the car runs a full second slower in the 1/8th and feels really sluggish....
Time for the flamethrower.....
I was wondering if the ignition or wires are going. The car had minor breakup at the launch but ran clean the rest of the way. I would think if the ignition or wires were bad the car would breakup going down the track...
The only real difference in the car running was it idles about 200rpm's higher than before. It idles at 1000rpm, I thought there might be a leak but could not find one.
Any suggestions on why the car would have less horsepower with a big exhaust and turbo..
1. 4 inch exhaust with Borla muffler, no cat...really nice work, will post pics later
2. Upgrade turbo to PT-76 a/r 0.96 from Turbonetics T72, a/r 0.96
3. NGK R6725-115 spark plugs all around--(damn thats expensive)
The car needed retuning in the boost over 8psi as it was running lean. I was surprised how much more fuel was needed to get the AFR to 11.5 at 18psi.
Anyway went to the track and after 4 hard attempts the car runs a full second slower in the 1/8th and feels really sluggish....
Time for the flamethrower.....
I was wondering if the ignition or wires are going. The car had minor breakup at the launch but ran clean the rest of the way. I would think if the ignition or wires were bad the car would breakup going down the track...
The only real difference in the car running was it idles about 200rpm's higher than before. It idles at 1000rpm, I thought there might be a leak but could not find one.
Any suggestions on why the car would have less horsepower with a big exhaust and turbo..