Im converting my 93 RX-7 to single turbo which turbo would be better for street use and occasional trips to the drag strip an HKS T51-KAI BB or an HKS T04-Z. Im looking to put out around 800 horses.

 

800horses for street??????

Neither will give you 800horses. with a street ported you might get 500horses.

Unless you go peripheral porting or something extreme (drag use only) you cannot get 800.

 

HAHA. Your funny!





A T-88 or larger might do it....





On a 20B. Maybe

 

"street use" and "800 horses" shouldnt be used in the same paragraph like that.

good luck with that!

 

these aren't supras ya know. 800 whp street cars they are not.

oh no....i used the "s" word

 

I ******* hate these damn fast and the furious kids.. If you want 800hp go get a supra or a venom viper.

 

Oh yeah!! before you do anything else.. do lots of research.. you have no idea what your getting into.

 

Amen. haha

 

800 is goin to be a little wild on the street lol and plan for long spool time you could probly make that on a pp or one of them half pport jobs with a huge turbo

 

Get some NAAAAWWWSSS. But dont blow the welds of the intake!!!!

 

your car will be so fast you can blow your metal floor mats right off the car!!!!!!!

 

LOL build yourself a 13B short crank triple and bolt a t88 to it - nice and easy

 

i'm sure you could get 800 ponies,you might need two turbos of that size plus nitrous, might even be streetable with the streets being so big in the US.You may want to add some neon lights to the underbody then that will look the bollocks when you flying down the street.

 

hey yall. how much hp are you getting? very impressive i must say.

 

Uh ya, streetable 800hp cannot be in the same sentence unless ur talking 20b and even that is a far stretch.

 

if you want 800hp just sell the FD and buy a skyline or a supra

 

lol

 

Hi guys, this is Maxboost808 posting under my new forum name. I really meant to say 800 rwhp---rearwheelhamsterpower. I will spray the NAWS if needed. Please help guys......

 

800 hp??????? Maybe T88 with 300 shot nos.....You might hit 800 hp for about a second or two before the engine goes.

 

heheheh you need that supra engine after all

 

I hate to say it mate but your ******* dreaming!!!

Some of the top Australian 7-8sec Rotary Drag cars don't make that much power and these are strickly track, not daily runabouts . Your going to need twin BIG turbos (high psi), running atleast a Richmond box (or better) with huge clutch/fuel/suspension setup. Trying to get it to spool on the street will be laughable. Even a 20B would be a push to make that much power and keep it streetable. How about invest all the cash you obviously have into a quad rotor.

http://ausrotary.dntinternet.com/for...highlight=quad

Far from streetable though and a little loud!!!

Or this one... very bloody nice!!! A BMW though!!

http://ausrotary.dntinternet.com/for...arb%2A&start=0

pics at the following... the pink one!! Check out the other pages, some nice cars!

http://www.planetspeedy.com/broomy/s...03/index_4.htm

 

www.rotaryshack.com

The owner's car has 730rwhp, on a 12a engine @ 36psi(I think it was at 36, not sure though) Is it streetable? **** NO! If he boosts above 20psi on the street then his car goes sideways the second he touches the gas pedal.

 

Gotta love public forums.

B

 

For those of you busting this guys *****. Give him a break. He is new and is learning. We all started somewhere.

Maxboost808. A little bit of advise. 350 to 400RWHP range, maybe a more suitable streetable solution for your RX 7. If you are looking for more than that, plan on spending alot more money, and having your car, for the most part, be unstreetable.

Check the newbie links at the top of the third gen forum. There is a lot good information there. Research, research, research.....And good luck

 

Exactamundo. I make right around 400 at 17 psi on pump gas. Faster than an SRT-10 Viper (40 to 140mph in 15.1 secs per Car and Driver) and a Lambo Murcielago (16.1 per Car and Driver). Works for me .