Stock Apex Seals?
Thread Starter
Full Member
Joined: Oct 2002
Posts: 248
Likes: 0
From: california
Stock Apex Seals?
I purchased a ......
Greddy T78 turbo kit
Greddy FMIC type 32 core
Apex power FC with commander
Cozmo Fuel pump
1200cc secondary injectors
I was wondering if i installed this and get it Dyno tuned will i be able to run the stock apex seals? Will i blow anythign up!
Greddy T78 turbo kit
Greddy FMIC type 32 core
Apex power FC with commander
Cozmo Fuel pump
1200cc secondary injectors
I was wondering if i installed this and get it Dyno tuned will i be able to run the stock apex seals? Will i blow anythign up!
Lives on the Forum
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
SR Motorsports runs stock seals in their 700+ hp drag car running about 26 psi.
With your 1200cc injectors, you probably won't be running much over 15 psi anyway. Besides, if you aren't already in the process of an engine rebuild, different apex seals aren't going to do you much good....
If you want more info, run a search, this has been discussed dozens of times.
With your 1200cc injectors, you probably won't be running much over 15 psi anyway. Besides, if you aren't already in the process of an engine rebuild, different apex seals aren't going to do you much good....
If you want more info, run a search, this has been discussed dozens of times.
Banned. I got OWNED!!!
Joined: Mar 2003
Posts: 116
Likes: 0
From: here
You won't blow anything out if the car is tuned properly. Even with stronger apex seal such as ceramic seal, your engine can go bye2 if it's not tuned properly. You should aim for about 350-400 rwhp with that setup if you worry too much about blowing your engine.
Thread
Thread Starter
Forum
Replies
Last Post