Special Manifold
#1
Newbie
Thread Starter
Join Date: Oct 2004
Location: Linköping, SWEDEN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Special Manifold
What do you think about it?
We made one of these to a guy in sweden that had problems(cracks) with his other SS manifold buyd from a company from US, we inspected it and noticed there where very bad welded, if you look inside(no burn through).
Do many of you have cracking problems???
So we did make a new one to him.
Made in SS316
This is how our manifold looks like...
http://www.pipe-arts.com/13b.html
/Lofa
We made one of these to a guy in sweden that had problems(cracks) with his other SS manifold buyd from a company from US, we inspected it and noticed there where very bad welded, if you look inside(no burn through).
Do many of you have cracking problems???
So we did make a new one to him.
Made in SS316
This is how our manifold looks like...
http://www.pipe-arts.com/13b.html
/Lofa
#3
Microtech Tuning!
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Wow! I was just looking through your webpage... those are some nice welds! That manifold is pretty nice too.
I remember from reading some threads a while ago, that people mentioned having the pipe come out of the engine-flange at least 3inches before having it curve. Also, there was something about having the wastegate pipes placed in the same direction as the exhaust flow through the manifold rather than having it placed perpendicularly to the primaries.
I remember from reading some threads a while ago, that people mentioned having the pipe come out of the engine-flange at least 3inches before having it curve. Also, there was something about having the wastegate pipes placed in the same direction as the exhaust flow through the manifold rather than having it placed perpendicularly to the primaries.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Group Buy & Product Dev. FD RX-7
7
03-21-18 11:19 AM