single turbo, size? response?
#1
Rotor or no motor
Thread Starter
iTrader: (24)
single turbo, size? response?
hey guys
i ve been thinking to upgrade my stock 2002 turbos to something bigger starting from the hf420, bnr twins etc because they are a lot quicker than a large single turbo.
i ve been thinking and thinking about it thought.
any single turbos that are quite quick on the response?
i ve seen in the for sale section the greddy t78 turbo kit,
any feedback on it??
any other recommendations to be capable around 500-600hp and quick?
Thank you
Con
i ve been thinking to upgrade my stock 2002 turbos to something bigger starting from the hf420, bnr twins etc because they are a lot quicker than a large single turbo.
i ve been thinking and thinking about it thought.
any single turbos that are quite quick on the response?
i ve seen in the for sale section the greddy t78 turbo kit,
any feedback on it??
any other recommendations to be capable around 500-600hp and quick?
Thank you
Con
#2
Rotary Freak
iTrader: (8)
Get.
A GT35/40(With the 88mm Inducer, and 62mm inducer) With a 1.06 Housings. Short Runner Manifold(1 3/4 ID Pipe). 60mm wastegate.
You will have 15psi just under 3500rpm, and power still start to drop off over 8000rpm(Not that you will notice it on the street).
This is the best Street package i have ever seen. I have done a few FDs here in australia with this setup and all make around 400RWHP at 15psi.(So around 440rwhp up your way due to conditions).
The above setup has alot of midrange torque.
If your interested in a kit, pm me. I make and sell turbo kits for all rotaries and i can supply the above.
A GT35/40(With the 88mm Inducer, and 62mm inducer) With a 1.06 Housings. Short Runner Manifold(1 3/4 ID Pipe). 60mm wastegate.
You will have 15psi just under 3500rpm, and power still start to drop off over 8000rpm(Not that you will notice it on the street).
This is the best Street package i have ever seen. I have done a few FDs here in australia with this setup and all make around 400RWHP at 15psi.(So around 440rwhp up your way due to conditions).
The above setup has alot of midrange torque.
If your interested in a kit, pm me. I make and sell turbo kits for all rotaries and i can supply the above.
#4
I use this one with stock port, boost set up at 1 bar. The boost start at 2000 rmp and full at 3000 to 6500 rpm. This turbo can run the max. 600 RWHP with porting engine.
https://www.rx7club.com/single-turbo-rx-7s-23/post-your-single-turbo-setup-33502/page16/
#5
Porsche ***
Join Date: Dec 2006
Location: Lebanon, OH
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I use this one with stock port, boost set up at 1 bar. The boost start at 2000 rmp and full at 3000 to 6500 rpm. This turbo can run the max. 600 RWHP with porting engine.
https://www.rx7club.com/showthread.php?t=33502&page=16