Single Turbo Noob
#1
Full Member
Thread Starter
Join Date: Dec 2006
Location: USA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Single Turbo Noob
I want to go to a single setup, but I am noob at the setup. I know I want a T78 ball bearing, and want to make at least 600RWHP. What is the best setup? Size of flang? What kind of manifold that will match? Which company? HKS? Greddy? Etc.... Thanks.
#2
PURIST
iTrader: (43)
Well first off, I dont think that there is a ball bearing T78. I believe they are only journal bearing turbos.
Second, i dont think anyone has made 600 rwhp on a t-78, i have only seen 600 hp on bigger turbos(t-88, gt42r, etc.). 600 rwhp is a lot of power and will only be achieved on race gas with high boost, around 25psi + depending on turbo.
I would suggest doing a lot of research, maybe look into aspec tuning. They make a Gt42r T6 turbo kit that with the right motor, fuel and tunning will get you to 600 rwhp. There are other routes you can go though, so do some research.
-Austin
Second, i dont think anyone has made 600 rwhp on a t-78, i have only seen 600 hp on bigger turbos(t-88, gt42r, etc.). 600 rwhp is a lot of power and will only be achieved on race gas with high boost, around 25psi + depending on turbo.
I would suggest doing a lot of research, maybe look into aspec tuning. They make a Gt42r T6 turbo kit that with the right motor, fuel and tunning will get you to 600 rwhp. There are other routes you can go though, so do some research.
-Austin
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM