single with stock ecu and intercooler??
#1
dominican boost junkie
Thread Starter
Join Date: May 2008
Location: Dominican Republic
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
single with stock ecu and intercooler??
somebody is selling me the following kit
the kit will include everything new :
++++++++++++++++++++++++++++++++++++++++++
- Turbonetics T62-1 t4 Turbo w/polish front housing
- HKS indestructible cast iron racing manifold (1/2 inch thick flanges)
- HKS 50mm race style wastegate
- Greddy style pulley set with belt
- Greddy type RS style blow off valve
- 100K mile 4" high flow air filter "blue, red or silver"
- 3" inch all mandrel bend downpipe with dumptube routed back in to
- Downpipe includes a 2000 degree ceramic coat
- 2.5" inch u-bend intercooler intake pipe w/greddy flange
- All flanges,fitting and clamps
- both oil feed and return oil lines are hi temp "stainless steel"t
and tells me that it will run with with stock ecu and intercooler @14 psi. making 395hp at the flywheel. i am skeptical to say the least. is this setup posible???
the kit will include everything new :
++++++++++++++++++++++++++++++++++++++++++
- Turbonetics T62-1 t4 Turbo w/polish front housing
- HKS indestructible cast iron racing manifold (1/2 inch thick flanges)
- HKS 50mm race style wastegate
- Greddy style pulley set with belt
- Greddy type RS style blow off valve
- 100K mile 4" high flow air filter "blue, red or silver"
- 3" inch all mandrel bend downpipe with dumptube routed back in to
- Downpipe includes a 2000 degree ceramic coat
- 2.5" inch u-bend intercooler intake pipe w/greddy flange
- All flanges,fitting and clamps
- both oil feed and return oil lines are hi temp "stainless steel"t
and tells me that it will run with with stock ecu and intercooler @14 psi. making 395hp at the flywheel. i am skeptical to say the least. is this setup posible???
#3
Will work for horsepower
Ebay: i saw that also and i have the same turbo. If you do put that stuff on there i would not go above 9/10 psi. You need alot more to run that setup before you boost 14 psi. This guy is full of crap to make that statment with out warning of the need components to go 14 psi safely. PS 9/10 psi might be too much!