I need some help jsut wanted to double check before i blw anything up! the first pic is a nipple and i think it goes to the bottom of my t78 whre a hard pipe comes off.... correct?? the second is the oil in i tihnk that once went to the stock twins. I blocked off the backside one that is the oil return! what do i do with the front side? this is on a t78! thanks alot

 

fasdf

 

first pic is for the heater core. . . second is for oil return from turbo.

paul

 

K got it figured out! thanks alot! im sure ill post some more dumbass questions later!

 

When plumbing the single, is it pretty standard to block off the rear oil return and use the front oil return only?

 

Yes!

 

if your turbo was somehow wedged into the engine bay in a way that it sat directly over the rear return port, then you could use it. BUT, since the turbo has to be moved forward in order to make it fit. . . the front return port is the way to go. plus the pick-up is closer to the rear return and you dont wanna pick up the same oil that just came out of the turbo. let it make its way back there.

paul