I have a 3rd gen 93' RX-7 and im having a new rebuilt engine put in.my stock turbos are broken so instead of me buying the same thing I wanted to switch over to a single turbo kit.my engine is stock,this will be a daily driver.I was thinking of getting the Greddy TD06 Kit for 93-95 RX-7.is this kit very good?how much HP can I expect from this kit?im kinda on a budget thats why Im thinking of that kit cause of the price.is there any thing else, I realy have to get for it to work?if I can get away with running at low boost w/ stock intercooler untill I can get a nice intercooler then I would like to do that,but please give me your input here.tell me exactly what I have to get extra for me to run this kit.or have any other suggestion on other kits?is it possable for me to get the greddy t78 kit and still run on low boost, untill i have enogh money for more stuff like bigger injectores ecu stuff etc....please help me!!

 

you need alot more then just the turbo kit to get it to work

 

If you can't afford it now... Just save. Don't try to put it on the car bit by bit. Not safe at all. The ECU required to safely tune a single FD is NO less than a grand. Not exactly for the "budget" buyer.

 

can you name the parts cause the greddy kit comes with all the turbo parts.I know it doent come with a BOV and you sayed I need a ecu, yeah they are 1k.and what else?can I do the whole setup for no more then 5grand do you think?

 

so are you saying that the only other thing I realy need to get it going, after getting the greddy "kit" is the programable ecu?I know I do need a boost controler too.

 

youll need fuel, larger ic, ecu, etc, etc, etc, to do it right you need alot of things, like he said, to do it correctly you need quite a few things, bassitup01 is my aol screen name if u have ?'s

 

ok, heres approx what you need:

turbo
manifold
oil lines
block off plates
custom dp
pipes (expensive)
coupler kit
intercooler
high flow cat or non at all (not sure on that one so dont get on me)
injectors (550,1300)
ecu (power fc)
tuning ($500-600)
and a lot of other things.

if your engine is old and low on compression, save for a rebuilt. if you try to program it yourself with no knowledge, save for a rebuild. if you try to take it to a cheap tuner, save for a rebuild...... it goes on and on...

hope this helps

 

actually I found a kit on rx7store that makes 400rwh for about 5grand.and it has it all!but actually my quetion was; what other things do I need besides the KIT.I SAYED IM USING A TURBO KIT.but thinks for the help any ways.I might aim you when I have time 2manytickets.

 

and also I sayed im having a new rebuilt engine put in also!!!if you read my post.

 

The bear minimums would be ECU, Turbo Kit, Block off plates, Pulley kit that has shorter belt and different pulleys to work without Air pump. As long as you keep boost levels way down you can use stock Intercooler and fuel system. By low I mean 6-8 psi. The turbo kit will incluse alot of the things you need. You can use stock BOV and Alot of stock junk until you can afford to upgrade it all. I wouldnt suggest a different turbo kit. TD07 is Base line stuff. There are much better kits with alot better turbos for little to equal price. 2manytickets owns a shop and get you good prices on parts. Just keep hounding him until you get the price you want.

 

you can call me if you prefer, 781-826-1500 is the work number, i wont be there until monday though, home number is 781-826-8731 ask for joe

 

thank you all !once I figure it all out ,I might give you a call or aim you 2manytickets. also can any one give me feedback on this system please? http://66.216.67.51/product.asp?0=220&1=335&3=708

 

any one know much about the T04S Kit 93-95 RX-7 by XS engineering?is this a good bolt on kit?http://66.216.67.51/product.asp?0=220&1=312&3=303

 

the upgraded twins are nice, the t04s kit is really nice but youll need alot of other things, if you want this done dont jus try and figure it out on your own talk to someone that knows what they are doing about it