Running TD06 On Stock Injectors and Pump ? Will this hold ?
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Aug 2003
Location: San Antonio, Texas
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Running TD06 On Stock Injectors and Pump ? Will this hold ?
Ok so I am looking to pickup a 94 FD that has a brand new engine no miles at all with new hoses and stuff. But the engine is running a on stock injectors along with the stock fuel pump . The PFC and Commander have never gotten a tune yet also. Will this be fine if I run stock boost levels ?
#3
Full Member
Should be ok if it's the 20g. If it's the 25g you are going to blow it up. With a fuel pump and good tunning, no problems running the TD06-20g to about 12psi on the stock injectors. I ran as much as 14psi w/ TD06-20G for a year on a ported motor w/ stock injs. and a Walbro fuel pump.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM