R-85 - TEC3r - Drag FD project
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
R-85 - TEC3r - Drag FD project
Hi guys
This Monday 9 May i m starting my FD drag car project here in Athens .
My car its a 93 model and until now my mods are :
New housing with 2 mm stock seals kit
Engine work and balanced by RotaryBeat .
Street potring with Ito templates in collaboration with my mechanic ( RotaryBeat )
Porting in intake , throttle body , etc..
R-85 turbo kit , with downpipe , Tial w/g , Tial blow - off valve ,
Rotary extreme titanium mid pipe and cat back .
861cc prim
1680 sec with Keith rails , Aeromotive fpr , gauge
w/b kit
2 Nippos in stock tank
2 Aeromotive h/f filters
Magnecor wires with ngk 10.5 racing plugs
3 row Greddy fmic
koyo radiator
kaaz
4.33 gears ratio
ikeya formula seguential shifter
removed air-pump - oil pump - p/s - a/c
m/t or m/h with stock 16'' rims and......
Tec3r
My goal is to run in low 10 ...or 9... in the ...future
Max boost 25 psi with VP- C-16 .
Photos in the next post !
I would like to thanks Keith and Dee !!!!
If someone wants to see my car ( before the single project )...
third generation section - threed (This is the way to modified an FD in Greece )
This Monday 9 May i m starting my FD drag car project here in Athens .
My car its a 93 model and until now my mods are :
New housing with 2 mm stock seals kit
Engine work and balanced by RotaryBeat .
Street potring with Ito templates in collaboration with my mechanic ( RotaryBeat )
Porting in intake , throttle body , etc..
R-85 turbo kit , with downpipe , Tial w/g , Tial blow - off valve ,
Rotary extreme titanium mid pipe and cat back .
861cc prim
1680 sec with Keith rails , Aeromotive fpr , gauge
w/b kit
2 Nippos in stock tank
2 Aeromotive h/f filters
Magnecor wires with ngk 10.5 racing plugs
3 row Greddy fmic
koyo radiator
kaaz
4.33 gears ratio
ikeya formula seguential shifter
removed air-pump - oil pump - p/s - a/c
m/t or m/h with stock 16'' rims and......
Tec3r
My goal is to run in low 10 ...or 9... in the ...future
Max boost 25 psi with VP- C-16 .
Photos in the next post !
I would like to thanks Keith and Dee !!!!
If someone wants to see my car ( before the single project )...
third generation section - threed (This is the way to modified an FD in Greece )
#3
Will u do me a kindness?
iTrader: (2)
Originally Posted by Power_Put
good luck sevenin7 dont forget ignition amp. you didn't mention any and what ecu are you running, are there any tuners in greece with experience on rotors or what??
#6
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Power_Put
good luck sevenin7 dont forget ignition amp. you didn't mention any and what ecu are you running, are there any tuners in greece with experience on rotors or what??
#7
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by the_glass_man
It's stated in the tread title and he mentions he's going to be running a TEC 3 ECU, which doesn't need an ignition amp cause it already comes with coils.
For the Tec3r its noy necessary to use ignition amp like... HKS twin power .
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zinx
Sounds like a good setup to me, one thing i think you may find usefull would be some polyurethene mounts for the engine and drivetrain
#14
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Εxactly , Max
but without the a/c , p/s , and battery .... i think .
I would like also , thank you , because everytime you answer in my e-mails !!
Thanks again!
Your boost level remains at 15-16 psi or higher ?
but without the a/c , p/s , and battery .... i think .
I would like also , thank you , because everytime you answer in my e-mails !!
Thanks again!
Your boost level remains at 15-16 psi or higher ?
#16
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by topaz
Hey Takis, good luck mate! The specs look great and the engine bay will look even greater! I want a ride when the project is finished!
#18
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
My car is ready , and run perfecty !
2 fotos from www.dragnews.gr ( 7 RWYB - page 10-11 ) supercarsmeeting .
In a few days fotos from my engine bay !
2 fotos from www.dragnews.gr ( 7 RWYB - page 10-11 ) supercarsmeeting .
In a few days fotos from my engine bay !
#19
Taki pretty awesome It was troubled to find it until i went to page 10 but it certainly worth it. I wish happy rides.
Btw i think is the most sexy car on the event after the Ferrari's.
What was realy your time?
Btw i think is the most sexy car on the event after the Ferrari's.
What was realy your time?
#20
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by supracharged
Taki pretty awesome It was troubled to find it until i went to page 10 but it certainly worth it. I wish happy rides.
Btw i think is the most sexy car on the event after the Ferrari's.
What was realy your time?
Btw i think is the most sexy car on the event after the Ferrari's.
What was realy your time?
#21
Originally Posted by sevenin7
The car is not ready for dragracing yet ...BUT i think im faster than 12 sec ...Ferraris
#24
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
I would like to Thanks :
ROTARY BEAT - drag team ( specially my mechanic Petros , and my electrician Demetrios )
JMC ( Mike , my tuner ) ... and
Dee Karagiannis
Keith ( KGparts )
Dan Schechter
1 foto : my FD
2 . 3 foto : me ...very happy !!!!
4. foto : me and my mechanic ( Petros ) ...how much air for rear tires !!
ROTARY BEAT - drag team ( specially my mechanic Petros , and my electrician Demetrios )
JMC ( Mike , my tuner ) ... and
Dee Karagiannis
Keith ( KGparts )
Dan Schechter
1 foto : my FD
2 . 3 foto : me ...very happy !!!!
4. foto : me and my mechanic ( Petros ) ...how much air for rear tires !!