porting and idle/start characteristics
10-20-01, 10:37 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2001
Location: houston
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
porting and idle/start characteristics
all of you guys with the LARGE exhaust ports and semi large intake ports. are they typically harder to start or is it just a matter of fiddling with the crank fuel/timing? the last two motors i built with very large exhaust ports take and extra second or so to start. it kinda bothers me but if it is normal than i wont worry about it.
10-21-01, 04:39 AM
#2
Junior Member
Join Date: Mar 2001
Location: Redwood, CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
How big are we talking here? Are they the same size as the exhaust ports on www.staffsauto.com??
I haven't had any problems whatsoever with starting...the motor starts up as it did when it was stock. And idle pretty close to a stock motor with some idle fuel adjustment.
I haven't had any problems whatsoever with starting...the motor starts up as it did when it was stock. And idle pretty close to a stock motor with some idle fuel adjustment.
10-21-01, 06:27 PM
#3
Senior Member
Thread Starter
Join Date: Aug 2001
Location: houston
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
i found out what it was
my leading coil has finally bitten the bullet which is why it is so hard to start. a failed to mentioin that this was on my personal car, every other car has had no problems
Thread
Thread Starter
Forum
Replies
Last Post