So, I'm planning on going FMIC with my FC and I need a little information on the setup that I plan on going with. Hopefully some of you that have done this before can give me a littel more information:

I have a t3/t4 hybrid turbo and I was looking at this intercooler:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

Now, the thing is, I've noticed that the turbo and the throttle body inlet are both routed from the passenger side. That being known, it seems that theres going to be more piping needed in order to set it up on that intercooler I linked. Will this cause any significant turbo lag having to pipe the intercooler for that setup? I was looking at this piping setup as well:

http://cgi.ebay.com/ebaymotors/ws/eB...981461610&rd=1

So, you turbo gurus... would that piping setup be enough to complete my fmic setup, or is there other bends that I would need? If you dont recommend that piping kit, please, indulge me with what parts I would need and how many of each.

Thanks!