Overboosting
#1
ninja
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Statesville/Greensboro, NC
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Overboosting
My car has been acting up lately. It's tuned for 15psi but lately its been spiking up to 30psi. I know that its not safe to be pushing the car as it is not tuned for that boost level. I havent taken it up to redline or anything but just around 4.5-5rpm and its shooting up to 30psi. What can be causing this?
Btw I'm still running the stock map sensor and my mods are below. Thanks for any input.
Tony
Btw I'm still running the stock map sensor and my mods are below. Thanks for any input.
Tony
#4
Senior Member
iTrader: (1)
Join Date: Jul 2005
Location: chicago
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
i had the same problem last year and popped the back plate because i had too much fuel on the high boost side of the map thinking it was safe. i pulled everything apart and found that the t4 gasket had split apart right down the seam. im assuming thats what it was cause everything was ok. im not an expert just explaining my experience.
#7
Rotary Enthusiast
iTrader: (1)
Join Date: Jul 2003
Location: balto
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=BoostedFd3s;8628956]i have the Tial 44mm wastegate and is plumbed into the atmosphere.[/QUOT
I think hes talking about the vacum lines! where are they hooked to?
and
Since you have an open dump on your wastegate is it opening under pressure? you will hear it when it opens if its vented to the atmosphere
I think hes talking about the vacum lines! where are they hooked to?
and
Since you have an open dump on your wastegate is it opening under pressure? you will hear it when it opens if its vented to the atmosphere
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
RX7 Rotary Rocket
3rd Generation Specific (1993-2002)
14
08-18-08 09:33 PM
serge1
Rotary Car Performance
2
04-26-02 08:06 PM