Bukwild

We welded up the DP this weekend and I was wondering if it was a good idea seeing the vband came on and off so easy, would it be a good idea to keep the exhaust system one continuious piece instead of putting 2 flanges in the center i.e. where the cat back would bolt up to????

I was thinking that worst case I would add another 4 inch vband setup in the center section


After the DP I am connecting a 4 inch Magnaflow oval as a midpipe and then a 4 inch round Magnaflow on the end as the end can.

Sorry DP pics are so dark. My camera phone takes crappy pics when the battery is low.

Zero R

iTrader: (1)

Bad idea, it becomes a pain when you have to remove it regardless of the single v-band.

-S-

Bukwild

yeah I thought about that. Anyone have 2 4'' flanges and a metal gasket they want to sell me then?

Zero R

iTrader: (1)

Just v-band the whole thing. Use some flex sections it will be fine. I offer that as a upgrade on some of our kits.

-S-

Bukwild

Sean where do you suggest placing the flex?

Zero R

iTrader: (1)

Next to the v-band clamps will work with some types. I would say it depends on the type of flex used. If you use the common ones the further from the flange the more range of movement you'll get.

-S-