Oil in tank for single turbo .
06-23-04, 06:36 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Oil in tank for single turbo .
I would like to know if its necessary to put some oil in tank for single turbo fd and who can inform me about the correct proportion ?
Thanks in advance !
Thanks in advance !
06-23-04, 09:06 PM
#2
Newbie
Join Date: Apr 2004
Location: east coast
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
By tank I'm assuming you mean fuel tank: NO, you only need oil in your tank if your oil metering pump is no longer functional (ie. you've installed a Haltech).
If you ARE no longer running the OMP, get a good 2 stroke oil and mix about 150:1. I run Swepco 2 stroke oil at about 150:1, this is roughly what the OMP meters the oil at full throttle (if I remember correctly).
If you ARE no longer running the OMP, get a good 2 stroke oil and mix about 150:1. I run Swepco 2 stroke oil at about 150:1, this is roughly what the OMP meters the oil at full throttle (if I remember correctly).
06-24-04, 07:17 AM
#3
Senior Member
Thread Starter
Join Date: Apr 2002
Location: greece
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Yes ,in fuel tank .
i'm running single , with motec m4 ecu .
Please explain me what do you mean ...150:1.
If i make a full fuel tank (76lit ) how much oil its necessary to mix together ?
i'm running single , with motec m4 ecu .
Please explain me what do you mean ...150:1.
If i make a full fuel tank (76lit ) how much oil its necessary to mix together ?
06-24-04, 10:06 PM
#4
Full Member
iTrader: (1)
Join Date: Mar 2001
Location: The great white north
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
I'm not familiar with the Motec, not sure if it runs your oil metering pump. If it doesn't, 150:1 means 150 parts fuel for 1 part oil (ie. 76 liters of gas, @500 ml of oil).
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM