Need pointers before building manifold!
Thread Starter
Full Member
Joined: Aug 2003
Posts: 69
Likes: 0
From: Sundsvall
Need pointers before building manifold!
I´m going to buil a new manifold for my single setup.
These are the specs for the turbo:
" P " Trim
Turbine Wheel TO4*P* Trim 64.5mm / 2.53* (Ind. 2.539*. May. 2.913*)
Compressor Wheel TO4E 60.98mm / 2.40* (Ind. 2.400* May. 3.582*)
Turbine Housing AR .84 NB016 Divided.
Compressor Housing .70 TO4E
As you might see the turbine house is pretty small for my 13B-REW engine. Does anyone have any god pointers in how to build the optimal manifold for this turbo?
These are the specs for the turbo:
" P " Trim
Turbine Wheel TO4*P* Trim 64.5mm / 2.53* (Ind. 2.539*. May. 2.913*)
Compressor Wheel TO4E 60.98mm / 2.40* (Ind. 2.400* May. 3.582*)
Turbine Housing AR .84 NB016 Divided.
Compressor Housing .70 TO4E
As you might see the turbine house is pretty small for my 13B-REW engine. Does anyone have any god pointers in how to build the optimal manifold for this turbo?
Thread
Thread Starter
Forum
Replies
Last Post
