Need Help!!! Please!
#1
Passenger
Posts: n/a
Need Help!!! Please!
Ok Im puttin on my Apexi RX6 turbo kit and I need people feedback I think there's something wrong w/ my kit becasue the exchaust manifold is touching the fender wall and its really hard to conenct the turbo in it. I was wondering too is people have to relocate the heater hose becuase I think because the Manifold is not sitting right that the turbo is hitting the heater hose when we are trying to connect it. Please help I need some info on this, I will to take some pictures of it so you can get more idea on what challenge im getting into.\
Thanks
Kelvin
Thanks
Kelvin
#2
Junior Member
Join Date: Mar 2001
Location: Golden Valley, MN
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Just got done installing mine a couple of weeks ago. The only major obstructions was the AC line, I got it to fit by doing a little pushing and pulling. I hope this helps. shoot me an email if you like.
kcountryman@parker.com
kcountryman@parker.com
#3
Full Member
Join Date: Mar 2001
Location: Waikele, Hawaii
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I had no problems with turbo hitting anything. While it is true that the turbo gets close to the inner fender, it shouldn't touch it either. Sorry couldn't be more help.
------------------
93 RX-7 R1
Apex single turbo
Apex PFC W/ boost module
custom SMIC
Greddy type-R BOV
mid-pipe
1200cc secondaries
nippondenso fuel pump
Racing Beat dual exhaust
------------------
93 RX-7 R1
Apex single turbo
Apex PFC W/ boost module
custom SMIC
Greddy type-R BOV
mid-pipe
1200cc secondaries
nippondenso fuel pump
Racing Beat dual exhaust
#5
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
I have no experience with the kit itself, but Eric Hsu's advice was always to make sure you follow the instructions. That entailed not tightening down all the nuts until the end.
This applies to the stock turbos with the stock exhuast manifold. Most likely it will to the Apexi kit also.
------------------
<A HREF="http://ricemobile.net/" TARGET=_blank> </A>
Jay
The Ricemobile
94 Base w/ never enough mods
87 Base w/ never enough miles
This applies to the stock turbos with the stock exhuast manifold. Most likely it will to the Apexi kit also.
------------------
<A HREF="http://ricemobile.net/" TARGET=_blank> </A>
Jay
The Ricemobile
94 Base w/ never enough mods
87 Base w/ never enough miles
#7
Passenger
Posts: n/a
I have some pic that I took on from the exchaust manifold hopefully ill be able to post it but my exchaust manifold is touching the inner fender for some reason now we have to relocate the heater hose. yup its an FD. thanks for the post guys apriciate your help.
Kelvin
Kelvin