Pics my friend.... we want more pics.

 

for now only this, more after 26th of June once i`ll get back from holidays

http://rx7.cz/gallery/?Qwd=./d2brakes&Qiv=thumbs&Qis=M

 

slowly moving forwards, now few questions :

can FD on PowerFC could be simplyfied as FC?

no emissions, but keeping AC/PS

all stuff on manifolds ditched/blocked off, TB mod?, keeping only BAC?

 

Is it correct that Powerplant subframe does not fit together with
trans brace and diff brace? (i.e. after install of trans brace and
diff brace, powerplant subframe will stay at home.....)

 

No it will install. Put on ppf, then make sure car is nice and level and put on the trans brace and diff brace. If the car isn't very level it makes it difficult.

 

Do you happen to have pics of it installed?

 

Yes it can.

REgards
Iwan

 

I can try to get you some this weekend. I guess the question is which trans brace and which diff brace you are using. I didn't even think about that.

 

had to modify PPS little bit but it fits now, will upload pics in few mins

 

pics :

http://rx7.cz/gallery/?Qwd=./2007-06...v=thumbs&Qis=M

 

getting ready to start it up :

http://rx7.cz/gallery/?Qwd=./2007-08...v=thumbs&Qis=M

 

awesome build! Cant wait to see the dyno results. G

 

cars does not run on dyno numbers, i have my GT35R FC running strong over 2 years already and have not made it to dyno yet

 

after some hassle, got the car running, but its not really good......PFC is quite new to me, and i find it harder to play with, than Haltech E6K

so, if anyone woudl like to help me set it up properly, i can post my actuall map on which it starts (not easy) and somehow even runs/idles and tell me whats wrong ?

setup is :

primary 850's
secondary 1600's (both with 10ohm resistor wired in)
BAC connected
IAT connected
stock MAP sensor connected
stock O2 sensro connected
stock TPS connected
no OMP (premix)
no boost controll at all, just Tial WG hooked up to pre TB source

i have

PowerFC v5.08
FC Commander3 ver 5.01A
FC-Edit 2.122

FPR without vac source set at 45psi

map attached

i had no time to hook up wideband today, will get to it next week probably.....

thanks for any input