looks like its coming along real nice.
|
Originally Posted by ChrisRX8PR
(Post 8803656)
Where did you get the really tight aluminum bends in 3" that you welded to the turbo compressor housing?
I need something like this but what I have found so far isn't even close. Thanks in advance. Chris you should be able to find equal in your country... or else i could send you some bends :lol: |
Looking really good Gustav! Now we will have 2 more wastegates marks on the floor in the dyno room:lol: Not to speak about the sound when the 2 opens:icon_tup: Should be a nice hearing for the neighbours:Wconfused
/Lasse |
looks great! but one question, why is the one dump tube going up and over the other when it looks like it could just go down? or is the subframe in the way?
|
Originally Posted by dregg100
(Post 8813529)
looks great! but one question, why is the one dump tube going up and over the other when it looks like it could just go down? or is the subframe in the way?
I will take a picture when its on the car, then you'll see :) |
Looks great! even better IRL! =)
|
update? :D
|
Originally Posted by ZAN_TUNING
(Post 8841254)
update? :D
within a few weeks ill get her on the dyno and then we'll see how much boost i dare to run :lol: |
gaaah... can't make up my mind whether to make a new 4" full exhaust or staying with my old 3".... feels wrong to stay 3" but i don't want to make my ears bleed more than they do when im out criusing..
What to do? |
i've done a couple full 4" exhaust on bridgeports and it really wasn't that bad! :D
as long as there are no exhaust leaks and the muffler exit a little past the bumper it wont resonate and drone inside the car. Outside..... that's another story but who cares!?!?!?!! hahaha |
Great lookin project you got goin there!!! Makes me wanna get out and work on mine....now if i can just get some money to finish it :( lol
Cant wait to see how your setup works. I've got a very similar setup ;) I mean....VERY similar!! |
Originally Posted by silvr94r2
(Post 8843574)
Great lookin project you got goin there!!! Makes me wanna get out and work on mine....now if i can just get some money to finish it :( lol
Cant wait to see how your setup works. I've got a very similar setup ;) I mean....VERY similar!! |
Originally Posted by ErnieT
(Post 8846493)
You need to finish that thing!!!!
Yeah 09 is the year for sure ;) Its only been like 10 or something!! haha I've been too busy messin with the quad and Rhino lately :) |
What type of welder are you using? what brand?
|
Also what kind of TB are you using? I love your welding, and your setup is godlike to me. I hope to build my car just like you did :)
|
Originally Posted by silvr94r2
(Post 8843574)
Great lookin project you got goin there!!! Makes me wanna get out and work on mine....now if i can just get some money to finish it :( lol
Cant wait to see how your setup works. I've got a very similar setup ;) I mean....VERY similar!! I can't deny that i got the weldon setup idea's from your project, i hope you don't mind :) |
Originally Posted by skir2222
(Post 8855089)
Also what kind of TB are you using? I love your welding, and your setup is godlike to me. I hope to build my car just like you did :)
I'm using a 200amp ac/dc welder, china brand for a couple of hundred bucks.. been working for 2 years now. |
i just had to polish it :wallbash: :lol:
hopefully i'll get back all parts by friday. http://www.molnsatra.se/bil/polish.jpg |
Looking good Gus!
|
Originally Posted by gusfd3s
(Post 8843099)
gaaah... can't make up my mind whether to make a new 4" full exhaust or staying with my old 3".... feels wrong to stay 3" but i don't want to make my ears bleed more than they do when im out criusing..
What to do? |
Originally Posted by gusfd3s
(Post 8856464)
i just had to polish it :wallbash: :lol:
hopefully i'll get back all parts by friday. http://www.molnsatra.se/bil/polish.jpg It looks great! Chris |
Originally Posted by ChrisRX8PR
(Post 8857008)
Did you polish that yourself or have it professionally done?
It looks great! Chris no no, i don't have the patience for that.. it was done by a local polishing guy, it took him 3 hours :icon_tup: |
Originally Posted by gusfd3s
(Post 8856440)
Thanks man!
I can't deny that i got the weldon setup idea's from your project, i hope you don't mind :) Not at all :) now i know why it looks so familiar :D I can't wait to see how it turns out being that we're so similar. |
Finally i got my stuff back!
hopefully i get to start her by tomorrow night :) http://www.molnsatra.se/bil/turbo/klart/1.jpg http://www.molnsatra.se/bil/turbo/klart/2.jpg http://www.molnsatra.se/bil/turbo/klart/3.jpg http://www.molnsatra.se/bil/turbo/klart/4.jpg http://www.molnsatra.se/bil/turbo/klart/5.jpg http://www.molnsatra.se/bil/turbo/klart/6.jpg http://www.molnsatra.se/bil/turbo/klart/7.jpg |
All times are GMT -5. The time now is 06:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands