Max's car
05-05-12, 03:59 PM
#1
Moderator
Thread Starter
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,605 Likes
on
1,848 Posts
Max's car
Max just put up a dyno sheet, and asked me to share.
car is super simple, REW block in an FC chassis. full bridgeport. HKS T51 turbo kit, GIANT intercooler. ignition is 11 heat range plugs, and a twin power. ECU is power FC.
dyno sheet is 18psi on PUMP gas. the car gets road raced here and there and has been together and running for a few years now. its an easy 550hp if he revved it a little higher....
please notice that the HP and TQ are scaled differently!
car is super simple, REW block in an FC chassis. full bridgeport. HKS T51 turbo kit, GIANT intercooler. ignition is 11 heat range plugs, and a twin power. ECU is power FC.
dyno sheet is 18psi on PUMP gas. the car gets road raced here and there and has been together and running for a few years now. its an easy 550hp if he revved it a little higher....
please notice that the HP and TQ are scaled differently!
05-15-12, 09:24 AM
#2
Yeah, I've tuned a street 4294r setup to 20psi a couple years ago for a customer. Car spins all the way through 3rd and barks 4th. So I know a setup like this very well. I'll say that the large intercooler is doing the work here if you're not running water injection (and he's not). It's hard to tell, was he at 10.5 or 10.2 afr?
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM