Looking for V band for my TD07 25G
#1
240RWHP 270TRQ @ 0.9Bar
Thread Starter
Looking for V band for my TD07 25G
Please help me.
I need a V Band flange that will fit on the exhaust housing of my TD07 25G and mate up to a 3" down pipe. I'm not exactly sure how this works and I could use some pointers. I don't have the turbo with me at the moment so I'm not sure what the diameter of the exducer is but if there is anyone who has gone through this before, your experience would be greatly appreciated.
-Kenji
I need a V Band flange that will fit on the exhaust housing of my TD07 25G and mate up to a 3" down pipe. I'm not exactly sure how this works and I could use some pointers. I don't have the turbo with me at the moment so I'm not sure what the diameter of the exducer is but if there is anyone who has gone through this before, your experience would be greatly appreciated.
-Kenji
#2
I'm with stupid -----^
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
would it not be easier to just weld on a flange to your downpipe that will work with the stock 4 bolt flange on the tdo7, then to remove it and put a v band on it?
#3
240RWHP 270TRQ @ 0.9Bar
Thread Starter
The stock flange on the exhaust housing was cut off by the previous owner for some strange reason. That is why I need to weld up a new one. I don't really care what kind, I just need to find it now cuz time is running out.
#4
Senior Member
Join Date: Jan 2004
Location: Texas
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
www.boostlogic.com
if they dont have it on their site, just call them, they can get anything
or just PM Turbo II FC, he works there
if they dont have it on their site, just call them, they can get anything
or just PM Turbo II FC, he works there
#5
240RWHP 270TRQ @ 0.9Bar
Thread Starter
This is gonna sound really stupid, but I never really looked before. Does the diameter of the hole in the flange match the diameter of the exit on the exhaust housing or is there a lip?
I'm asking because to my knowledge the inner diameter of the exhaust housing is 3.5", but Greddy says that the diameter of the stock flange is only 70mm wich works out to roughly 2.8". Do they even make a flange in that size?
I'm asking because to my knowledge the inner diameter of the exhaust housing is 3.5", but Greddy says that the diameter of the stock flange is only 70mm wich works out to roughly 2.8". Do they even make a flange in that size?
Thread
Thread Starter
Forum
Replies
Last Post