Large SMIC or FMIC?
Thread Starter
Rotary Enthusiast
Joined: Oct 2001
Posts: 1,020
Likes: 0
From: Canada
Large SMIC or FMIC?
I have a small SMIC that is a Knight Sport. Will a large SMIC like the M2 work with a T-78 setup or do I have to go FMIC. I like the looks of the SMIC, it fills out the engine bay. I dont want to start a debate, just want to know if the large SMIC will work
Thanks
Thanks
Last edited by sub-zero; Feb 17, 2002 at 04:46 PM.
WWFSMD
Joined: Jun 2001
Posts: 5,035
Likes: 4
From: SoCal
You can run a SMIC with a single. I've got a Medium IC with my RX6 setup in the first picture on this page:
http://www.maxcooper.com/rx7/gallery/mycar/index.html
I used some 90mm Santoprene hose from McMaster-Carr (http://www.mcmaster.com/) to move the intake so it gets colder air and clears the IC. You'll probably need a different size, but that is good, cheap stuff to use.
-Max
http://www.maxcooper.com/rx7/gallery/mycar/index.html
I used some 90mm Santoprene hose from McMaster-Carr (http://www.mcmaster.com/) to move the intake so it gets colder air and clears the IC. You'll probably need a different size, but that is good, cheap stuff to use.
-Max
WWFSMD
Joined: Jun 2001
Posts: 5,035
Likes: 4
From: SoCal
Originally posted by sub-zero
Max, how about that huge intake filter that comes with the Greddy kit, will that fit with a large stock mount?
Max, how about that huge intake filter that comes with the Greddy kit, will that fit with a large stock mount?
-Max
