just got a hks wastegate, what hose goes where?
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Salem, OR
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
just got a hks wastegate, what hose goes where?
Just got the hks wastegate and was wondering where does the two hoses go to. There's one on top and one on the side. I know one comes from the boost controller but, what about the other one and what does this hose do for the wastegate. Which one is for what???(top for boost controller?)
I tried a search, but nothing!
Thanks for your help!!!
I tried a search, but nothing!
Thanks for your help!!!
#2
Rotary Enthusiast
on most aftermarket wastegates, the top nipple is for the boost controller and the side nipple is for a source right after the turbo (gives better response that way)
#3
Rotary Enthusiast
Join Date: Aug 2001
Location: Memphis, TN - wishin' i was back in Ft Worth
Posts: 1,024
Likes: 0
Received 1 Like
on
1 Post
what about the little brass fitting that is in the side of the housing? could that be used? came supplied in my new housing that i bought from precision turbo
#5
Rotary Enthusiast
after the intake, as close to the turbo as you can get it. you can even hook it to the manifold, it just isn't as accurate as if you hooked it up right after the turbo.
#7
Senior Member
Join Date: Dec 2001
Location: Somewhere in California
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
From Maximum Boost, I read that placing the WG actuator line right on the turbo has slower response. Putting it right on the manifold after the throttle will yield faster response, and I believe that is due to a brief spike in pressure.
Maximum Boost pg 147-148
Maximum Boost pg 147-148