So I've done alot of searching with tons of advice and mixed results. I'm in the process of redoing my fuel system and turbo setup to hopefully hit 550-600rwhp. Going with a s366. I'm also running the power fc and don't want to change as im on a tight budget. So question is what is the cheapest most cost effective ignition setup? Im leaning towards msd based on my search results but looking for opinions. Thanks.

 

"cheapest most cost effective ignition"

some questions are difficult to answer...

not this one.

buy four IGN-1A coils and a set of AR3932 plugs and make up a good set of primary wires.

no need to apologize for a Power FC as it is an excellent piece when combined w a Datalogit.

you will want to datalog AFRs and FUEL PRESSURE and you are set.

howard .

 

Thanks howard. Those are the mercury marine coils correct? Is there a write up for installing them with the power fc?

 

forum member C Ludwig would be a great person to contact on the coils... each coil has 5 wires and i believe he offers a harness... as well as can help you on the dwell settins.... i am using 4.5 mS

howard

 

Ok thanks!

 

Cheapest most cost effective for me would be a HKS Twin Power.

 

HKS Twin Power with a TII leading coil, with Taylor 45 ohm wires with NGK R7420-n plugs.