I have a question for all you guys on a 90 GXL
01-23-02, 09:00 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: Atlanta,Ga
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
I have a question for all you guys on a 90 GXL
on my car i am running stock everything i have an intake head but haven't put it on yet can you guys give me some info on what kinda of turbo i should get and how much psi i should boost at on a bone stock 1990 GXL please let me know your opinions on this!!i have a 115k miles too
01-23-02, 09:06 PM
#2
Rotary Enthusiast
iTrader: (2)
Join Date: Sep 2001
Location: Altadena, CA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Ideally you should go with a TII (sell GXL and buy TII)... but i didn't listen to this answer either, so...
If you chose a decent intercooler, you could probably run about 6 lbs of boost using a stock series 5 TII turbocharger (you can usually find 'em for around 200 bucks). To do this you would (at the very least) need a TII fuel pump, Injectors, and a RRFPR (rising rate fuel pressure regulator). There was a thread awhile ago on how to make the TII turbo / manifold assembly clear the NA's intake manifold. I think it said that you needed to have somebody weld 2.5" extensions onto the exhaust ports (no big deal...).
Good luck!,
Manolis
P.S. I went to a TII motor and conversion
If you chose a decent intercooler, you could probably run about 6 lbs of boost using a stock series 5 TII turbocharger (you can usually find 'em for around 200 bucks). To do this you would (at the very least) need a TII fuel pump, Injectors, and a RRFPR (rising rate fuel pressure regulator). There was a thread awhile ago on how to make the TII turbo / manifold assembly clear the NA's intake manifold. I think it said that you needed to have somebody weld 2.5" extensions onto the exhaust ports (no big deal...).
Good luck!,
Manolis
P.S. I went to a TII motor and conversion
Thread
Thread Starter
Forum
Replies
Last Post