rx7onfire

iTrader: (10)

I just picked up an Aeromotive A1000 fuel pump with filter. I need to know the setup for this pump. I have a 87 TII with a 13B-RE motor with the KGParts rails and an Aeromotive FPR. If you have pics that would be great. I basically need to know the setup from the tank to the rails and back. THanks in advance!

MrRx

iTrader: (1)

tank -> filter -> A1000 -> Rails -> FPR -> tank return.

rx7onfire

iTrader: (10)

So should I tap into the tank with a fitting, or just come through where the factory pickup is? Also, do I run the rails series or parallel?

MrRx

iTrader: (1)

a lot of people have taped into the tank and mounted the pump outside the car, so it would be quiet. Other have mounted it in tank.

it doesnt make a whole lot of difference in how you run the rails, Ive allways does in parallel, but ive seen both ways with no side effects.

rx7onfire

iTrader: (10)

Thanks MrRx, I appreciate the help.