how difficult?
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: New York, NY
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
how difficult?
Ok, I'm not talking tuning - just wondering, how difficult it would be for a "backyard mechanic" like myself, to install a single turbo kit into an FD? I've never done any engine work, but i have installed a turbo kit on a honda prelude and such...
Anyone have an instruction manual on single turbo install? mebbe looking at that would be a good start...
Anyone have an instruction manual on single turbo install? mebbe looking at that would be a good start...
#2
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
If you buy a kit like the Apexi kit or something that has all the parts you need it is not very difficult. There are quite a few people around here that could help if you run into some odd problem or give you pointers once you pick out the kit you want.
If you have turboed an integra, then the RX-7 shouldn't be to difficult.
If you have turboed an integra, then the RX-7 shouldn't be to difficult.
#3
Rotary Enthusiast
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: how difficult?
the hardest in my opinion is taking off the stock turbos and manifold..once you do this, installing the single turbo is cake
Originally posted by nycrx7
Ok, I'm not talking tuning - just wondering, how difficult it would be for a "backyard mechanic" like myself, to install a single turbo kit into an FD? I've never done any engine work, but i have installed a turbo kit on a honda prelude and such...
Anyone have an instruction manual on single turbo install? mebbe looking at that would be a good start...
Ok, I'm not talking tuning - just wondering, how difficult it would be for a "backyard mechanic" like myself, to install a single turbo kit into an FD? I've never done any engine work, but i have installed a turbo kit on a honda prelude and such...
Anyone have an instruction manual on single turbo install? mebbe looking at that would be a good start...
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM
RyanFox
New Member RX-7 Technical
7
09-18-15 09:09 PM