Help with Turbo Selection
01-28-07, 08:32 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Florida
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Help with Turbo Selection
I am in need of advice on which turbo to go with on my project.
Engine: 13b Cosmo w/Stock ports
Manifold: Plan on funning a HKS cast iron for a FD
Downpipe:Would like to run a 2.5" with a Mid Magnaflow and a rear Magnaflow
Intercooler: Cartech 2.5" core thickness
Power output: Looking to produce a little over 300rwhp and no more than 350rwhp, being this setup will be in a 85 GSL-SE... keeping within this power range will keep most of itz driveablity.
Basicly trying to find what turbo would best fit this setup......turning to the guyz that have been there and done this to share the experience.
thanx,
-vern
Engine: 13b Cosmo w/Stock ports
Manifold: Plan on funning a HKS cast iron for a FD
Downpipe:Would like to run a 2.5" with a Mid Magnaflow and a rear Magnaflow
Intercooler: Cartech 2.5" core thickness
Power output: Looking to produce a little over 300rwhp and no more than 350rwhp, being this setup will be in a 85 GSL-SE... keeping within this power range will keep most of itz driveablity.
Basicly trying to find what turbo would best fit this setup......turning to the guyz that have been there and done this to share the experience.
thanx,
-vern
Thread
Thread Starter
Forum
Replies
Last Post
NoMorePoison
2nd Generation Specific (1986-1992)
11
08-18-15 11:18 AM