well i have inquired this turbo (ht18s 2sf)
the problem is findign the exhaust manifold to fit it.
ive looked and looked and i cannot find something to fit.
can somebody help me out with this and tell me were to find an
exhaust manifold for my FD.

 

dude that is the stock turbo from an 89-91 Rx-7 turbo. you should be able to use the stock exhaust manifold from that generation. While it is a lot simpler than the FD twins, it'll make 240-250whp on a good day and you will need to make custom oil and coolant lines. You could always send it to BNR supercars and get it upgraded. they can make you a hybrid that will do mid to high 300s to the wheels. That basically flows around as much as the stock turbos while being less responsive.

 

that blows! so much for a good deal its useless to me then

 

If you're looking for a 300ish WHP turbo, hit up my FS thread.

 

Hi All,,

Not trying to hijack the tread but I also a S2 turbo and are putting in my 4WD copying another 4WD and his goes like stink.

I just need to know which one's are the oil lines and what are the waterlines, I know the large one must be the water return but the other three are about the same size.

Thanks

Graham

 

you'll probably just have to measure them yourself, most people run the OEM lines on these cars.

 

You have misunderstood what I was asking, Running the lines is no problem what I want to know is looking down on the turbo exhast to the rear ,,, which is the oil "IN" and oil "OUT"

Graham