Help with installing Greddy Profec B SPec II boost controller on a single
09-08-03, 08:58 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: New Jersey
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Help with installing Greddy Profec B SPec II boost controller on a single
I need confirmation that I'm installing the silicone hoses from the greddy boost controller valve unit to the HKS wastegate the right way. I ran a hose from the COM port of the valve unit to the top fitting on the HKS wastegate. I then ran a two foot hose from the NO port on the valve unit and installed a tee fitting in there. One side of the tee went to the compressor side of the turbo and the other end of the tee went to the side port of the HKS wastegate.
Thread
Thread Starter
Forum
Replies
Last Post
