I was talking to Haltech USA. They told me the E8 has a mapable aux output that can be programed like an aux injector. Similiar to a FJO methanol injection kit or like any other aux injection kit. I downloaded the software and either since I am unfamiliar with the software or plain stupid I do not see how they do this. The only thing I see is start points on load, rpm etc which is useless.

Anybody know how such can be accomplished? Is this setup on the generic PMW map?

Thanks,

 

Thats how I plan to set it up. It probably requires an additional injector driver that the PWM out would control, which is what it pretty much works just like.

 

I am using the aux load switch to trigger my alcohol injection, but I am not injecting "a lot". I am only using a single 7lbs nozzle and 180lph fuel pump. I have it set up to when the engine sees pressure over 7lbs it's on, under 7lbs it's off, and the fuel map written around the alcohol.

 

I plan to set it up with 2 alcohol compatible 1600cc injectors plumbed into the manifold. And basicly set it up like an oem fuel system. The down side is that, or at least as far as I know there is no way to do it without having a retun line for the excess fuel.