GT4088 on stock ports
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 14
Likes: 0
From: Bedfordshire, England
GT4088 on stock ports
Anyone have experience of this?
I was looking for a Gt35 but one of these has come up at a good price. I intend to go for a large street port at a later date.
Purpose is for a street/track car.
I was looking for a Gt35 but one of these has come up at a good price. I intend to go for a large street port at a later date.
Purpose is for a street/track car.
I had a small street port and got 15 lbs by 4300 RPMs on a 4088R with a 1.19 hotside. While the BB might help with spool (maybe 200 RPMs or so), a smaller hot side would give a similar response for a journal bearing 4088R. Made 430 rwhp at 15 psi.
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 14
Likes: 0
From: Bedfordshire, England
Looking at options at present. TD61 followed by gt35 are still favorites but so much to consider.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM