Hey guys I mocked up my gt35r A spec kit I'm using it on a REW with a 13bt Front cover into an FC.


My Question; Water supply & return As long as Im above the water pump on return and below in supply......., OK
The damn FSM wont let me copy & paste
Also Oil; can I return to front as in front cover LikeT2 and block off the return on REW it is in the rear of the engine
I wish I had a digital camera, but hoew I lost it....this is a post for the lounge


Thanks for the help sorry if it is vague.

Johny

 

Rear oil return can be blocked off, there should have been a plate with the kit. I beleive the front is used because it goes to the oil cooler from the front cover. I also swapped the pipes and the one with all the bends is on the turbo and the strait one on the block. The reason I did this is becuase it does less of a kink in the hose. ATP has nicer hose or you can switch to a SS braided if you want to spend the money.

I don't remember which is inlet or return on the water lines but the connection closest to the intake manifold is the upper connection on the water housing on mine.

I'm not familiar with the FC nor the 13BT front cover. I have a 13BREW and 500R. It's sometimes hard to get in touch with A-Spec. I just recently found out my yahoo mail was being filtered in to their junk mail.