I was wondering if I could use the Greddy Type 24 FMIC that Came for the stock twins with a Greddy T-78. I'm guessing the pipping will not meet but with some fabrication it should. would it?

 

BRADMAHONEY has a thread going for his 24v FMIC install...He's also going to install the T-78 at the same time so I am assuming he did his research before going this route...I am guessing he will share how he made it work with us...Hope so

 

jason said someone at the rx-7 store had a gt35/40 w/ a 2row greddy FMIC

works like a charm

 

That would be nocab's FD. It has the 2-row,gt35/40 and Feed front bumper.

 

Note the T78 is a MUCH LARGER single turbo than a GT35/40. Definitely recommend the Type 32 V-spec (3-row) FMIC for a T78 (Rx7 Store's Jason Baughman runs a T78 with a 3-row, as I recall?).

 

I have a friend that runs the Blitz front mount intercooler for the stock twins with a t78 and it works just fine.

 

If I ever finish mine I will let you know how it works.

 

you want the 32 R-SPEC ! the 3row

you should def go for ATLEAST the 24 R-SPEC

they have three different models for the FD

24 V-Spec = stock twins 2 row core
24 R-Spec = upgraded turbo 2 row core
32 R-Spec = big turbo and 3 row core

i have the 32 R-spec with my T78 and it bolts up 100%

 

Is the 32R just a thicker version of the 24R ?? The number of "rows" between 2 row and 3 row has always kinda confused me, sorry.