Fueling question?
#1
Ee / Cpe
Thread Starter
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
Fueling question?
I know what everyones gonna say but im well aware of injector duty cycles and dangers and such... My question is simply will the stock fuel system work with a single turbo setup. The reason im asking is because i know you have to do the block off plates but im not sure if that stops the stock fpr from working.
the reason i ask is because i might be a little short on cash when i get around to putting my single in and want to know what my options are until i can afford the upgrade.
the reason i ask is because i might be a little short on cash when i get around to putting my single in and want to know what my options are until i can afford the upgrade.
#2
Senior Member
Join Date: Oct 2003
Location: Northwest
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
i'm running a to4s with stock fuel system other than a supra TT fuel pump...up to about 8-9 psi.
to keep the AF ratios under 12...i have to run about 90% fuel injector duty cycle.
so yes, it can be done.
I have the vacuum line straight to the fuel pressure regulator. Nothing is impacted by block off plates.
I have 1600cc injectors/etc in the bin...just haven't installed them yet
john
to keep the AF ratios under 12...i have to run about 90% fuel injector duty cycle.
so yes, it can be done.
I have the vacuum line straight to the fuel pressure regulator. Nothing is impacted by block off plates.
I have 1600cc injectors/etc in the bin...just haven't installed them yet
john
#4
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
as long as your a/f is good then your ok. You'll prob be maxed to around 350ish rwhp but I dont know what that translates to in terms of boost for your turbo
STEPHEN
STEPHEN
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM