Seven!!

Im in the final stages of my single turbo build and was wondering if 1600cc secondary injectors and 1000cc primary injectors would be to much? I only ask this cause I plan on going with RC injectors and they don't make an 850cc injector. Should I go with a different brand of injector? Any advice is welcome thanx.

JHew84

iTrader: (9)

We'll need to know more about your setup, the injectors need to be properly matched with not only turbo you're running but also how much boost you'll be running and some other things!

Generally speaking though that amount of injector should be fine for a reasonable sized turbo running a fair amount of boost.

ivegonemad

yes how much HP are you trying to make?? what turbo...come details!

Jason

iTrader: (5)

For a typical daily driver the the 1680/850cc combo is plenty and will handle well over 500HP.

Kits listed here are popular setups that provide plenty of fuel for most turbo setups.

http://www.rx7store.net/product_p/ultimatefuel.htm

http://www.rx7store.net/CJ_motorspor...age1%20inj.htm

Seven!!

my setup includes a 62-1 ballbearing turbonetics turbo, power FC, tubular manifold, big street port, ACT lightend flywheel, and a few other goodies. im lookin for about 400 to 425 rwhp on 15-16 psi.

charlies7

iTrader: (4)

CJ motorsports makes a good kit..Contact them.

ivegonemad

i love thier dual fuel pump setup i wish they havd it for the fc....

Dudemaaanownsanrx7

iTrader: (23)

you can get that power with 550/1600 easy. I would go with smaller primaries. the 1000's will be harder to lean out at idle. Especially if you're running a PFC. I can't speak for other EMS's. Don't they make a 720cc or something along those lines? 1000/1600 is overkill.