I'm working on a 13bt 1st gen project which will be making around 450rwhp. I was planning on using the Aeromotive fuel pump which needs a -10 feed line. I still wan't to use my stock fuel tank but it only has a 1/2" pick-up. What would be the best way to run a -10 line from the stock tank?

 

Hard metal line...
There are tube fittings that'll adapt the hard line to AN fitting.



-Ted

 

i wouldnt recommend using the stock pick up witha aeromotive. use a sump off the bottom if yoru going to do it that way.

 

he's right. use a bung. IMHO